Kneading Roller

At first of 19 Centuries, the textile industry had a lot the progress more than the rubber industry. Therefore, it is found that, the research studied for the used rubber of forest during the past period had depended on the clothing of the industry of textile as the component to do grinds it. Or do the impervious coat or elastic fabric or the rubber air-baquet, etc. Therefore, the world the first rubber machines it industrial that belonged to English, Thomas Hancock that had established in 1820 and the second factory that belonged to Scot, the Macintosh in 1823 that had produced the impervious coat that had used clothing of the industry of textile.

Although the two factories had produced the same products but the same usage of the different technique. Charles Macintosh had used the kerosene to melt rubber in the solution and using then 2 leaves of clothing to cover the two sides to allow the solution in the middle. Thomas Hancock had used the grating and knead machines to grind to soften before to melt and before to support in the leaf texture, and cutting then to let pieces work after, as the kneepad, the gloves and the belt, etc.

Although the two productions of the factories had the quality problem, c. -a -d. while using since a long time, if the time had turned the cold one, it would become hard and fragile or if the time were hot then it would turn in the vase and melted. But the invention of grating of Hancock and to knead the machine was considered as the revolution for the rubber industry, because the grating and knead machines was the 2 rolls kneading the machine that was the origin of the to knead and to mix machines to mix it the internal or external machine and it spark also the idea to create machine of grating of crepe that The rubber of Pad to later. Even rubber believed it machines leaf kneading, that had been used these days, had also the origin of Thomas Hancock machines it kneading also. Therefore, the grating & kneading the machine had become the all used the machine to cut, knead in the leaf, or mixing various types of rubbers in a texture, by adjusting with appropriate the interval of roll and the revolution proportion dispatching cylinder between the in front of and the rear cylinder.

The rubber that had been by the machine kneading for would become a lot hot time and softened, therefore it easily would be supported in grinds it and when it was soaked in the solution, it would melt quicker. Therefore, Thomas Hancock machines it kneading was considered as the prototype machine that had originated to the others machine, that were used in almost all types of industry. Or in the industry of product of rubber or same the industry of raw rubber in this moment.

Later in 1836, Edwin Chaffe, an America had continued with success the invention of Hancock while connecting the heat wave in the machine mixing and the machine of knead surface to soften rubber to become the slice quicker film, had for result the treatment of impervious coat to have the high effectiveness, but the problem on the quality always remained as before, even to And Charles Goodyear had discovered with success the method of vulcanization, while grinding and mix with THE zinc oxide in the texture of rubber and then supported with the heat under the high pressure.

Soft pieces of functioning would become again pieces with fort and hard, or in any temperature, hot or cold nevertheless healed rubber always maintains the condition of origin. Therefore, the non resolved problem on broken or fragile when cold and the when hot vase for a lot of years had been resolved. When the problem on the quality had been resolved, the rubber industry in Europe & America had increased very quickly.

The Barrier is full of water to the summit, opens once the barrier, all flow easily without the interruption!

Therefore, Rubber Historian Industrial had taken the day of Thomas Hancock and of conclusion of method of the Goodyear of Charles to heal rubber as the date beginning for the rubber of the world era industrial and again in this day, was the day that the human had begun learning the method to cultivate the forest hedveda, because, the hedvedas of current forest had not what the volume, how dear, the this is

Not a long time after the rubber discovery heals the method, there had been discovered the method to produce Ebonite that had the similar method to do healed rubber, only to use more powder of sulfate and use the highest temperature of heat. Ebonite is solid rubber as the plywood or the leaf but the concrete lighter in the weight, toxic no sustained acid and alkaline and isolated also to heat of the and the electricity. Then, the it is suitable to use in to do device appliance, the product reservoirs, the shell of battery and the insulating one of heat, etc. A lot of pens of fountain of name of dear brand also are done ebonite.

Luck calms with the side of rich man again, c. -a -d. in 1846 Parks of Andrew, an English discovered with success the method healing under the normal condition while soaking the functioning piece in the solution of chloride of sulfur instead of supporting with the heat. Although it could use with the only small object but the small it was the a lot of convenience and quicker than to support with the heat method. The this is the initial point to create industry of product of rubber that has small sizes that we used in this moment.

In 1846, Thomas Hancock could with success to invent the solid tire for the cart of horse of Victoria of Queen. It was considered as the departure point for the industry of tire of rubber that we used in this moment. Therefore, after having discovered the process healing or roughly in the mi-ten-ninth century, there are again products of rubbers are products as seen in the Exposition of Products of Rubber to London, 1851 and to Paris 1855. Most of the products were the household furnishings do Ebonite, the impervious one of odorless rubber, elastic fabric, the solid tires, the shoes of rubber and air the matelas, etc.